Precautions for storage and use of double side tooth synchronous belt

Precautions for storage and use of double side tooth synchronous belt

Double sided tooth synchronous belt is a synchronous belt with teeth on both sides. It can be divided into double-sided opposite tooth synchronous belt and double-sided staggered tooth synchronous belt. It is also a kind of synchronous belt with high utilization rate. It is mainly used for double-sided transmission. It has the characteristics of synchronization, simultaneity and double efficiency, and is favored by many customers. However, if it is stored or used for a long time, it will also cause damage. Once it is damaged, it will be repaired or replaced, which will not only increase the production cost of the enterprise, but also affect the production process. Therefore, it is necessary to pay attention to some problems when using the double-sided synchronous belt, which can effectively reduce unnecessary trouble. So let’s introduce the storage and use of double-sided tooth synchronous belt. What should be paid attention to?

 

First of all, generally, if the double-sided tooth synchronous belt is not used for a long time, the synchronous belt manufacturer recommends that it be removed and stored, and it should be placed in a cool place. In case of premature aging, the end life of the synchronous belt will not be affected Zui. When installing the double-sided tooth synchronous belt, please shorten the center distance or loosen the tensioning wheel, and reset it after installation. Here, remember not to push the belt from the pulley to the side by hard pulling and grinding, which will damage the belt body. During installation, the edge line of the double-sided tooth synchronous belt must be perpendicular to the tooth surface of the wheel. The parallelism of the main shaft of the driving wheel and the driven wheel shall be controlled at the tangent TG = 1 / 1000. The shaft position will not directly affect the service life.

 

Precautions for the use of double-sided synchronous belt: when purchasing, pay attention to the product surface is clean, the belt is not distorted and deformed, and the belt teeth are full. The synchronous belt products shall be strictly prohibited from twists and turns, so as not to damage the skeleton material and affect the belt strength. It is forbidden to scratch the belt for synchronous belt products to avoid early damage of the belt. Synchronous belt products should avoid contact with chemicals. Try to avoid long-term contact with oil and water.